SKU: NTCRELO-MBHCategories: Oak, 11 Light Grey, TuffCore Laminate, Estate Collection

820 RE-LAM Oak

Name: 820 RE-LAM Oak (Attached IXPE)
SKU: NTCRELO-MBH
Price: 10.00 USD
Availability: InStock

(Attached IXPE)

Species
Oak

Product Type
TuffCore Laminate

Tone
11 Light Grey
12 Dark Grey

Sample Disclaimer

Please Note: Since wood is a natural product there will be natural variations in color, tone, and grain that may or may not be represented by this sample. You or the installer should carefully inspect the product before installing for any milling, dimension, or visual defects.

PRODUCT DETAILS

Specifications

Core Construction	Tuffcore HDF - High Density Fiberboard
Core Type	Black Core 950 Psi+
Joint System	Unilin - Drop-n-Lock
Texture	Registered Embossed (EIR)
Edge Profile	1.2 mm Painted Bevel
Finish Type	AC4 Melemaine wear layer infused with alluminum oxide
Gloss Levels	5 - 7%
Maintenance	Zep Neutral PH Floor Cleaner
Repair Finish	N/A
Expansion Requirements	5/16” expansion gap for the first 20 Lineal feet (length or width). Add additional 1/16” for every 5’ of install (length or width) upto 5/8”. T-molds are required for rooms exceeding 50 lineal feet in length and width and 40 lineal feet for installations over in floor radiant heat.
Uses	Residential - Commercial

Installation

Expansion Requirements

Leave a minimum of 5/16” expansion gap for all installations under 20’ lengthwise or widthwise. For installations exceeding 20’ lengthwise or widthwise, add 1/16” per additional 5’of length or width, up to 5/8”. For example: 25 linear feet would require a 3/8” expansion gap.

Transition strips/breaks are required on installation exceeding 50 feet lengthwise or widthwise. See radiant heat section for in-floor heat.

Never install cabinetry, islands, or other permanent fixtures on top of a floated floor.

Never use nails to secure anything to the floor. The floor must be allowed to float.

Leave the required expansion gap around all walls, tubs/ shower, plumbing fixtures, large Sub Zero style refrigerators, exterior doors, etc.

Once the floor installation is complete, remove all spacers that were used to maintain the expansion gap.

Care & Maintenance

Vacuum (WITHOUT BEATER BRUSH), dry mop, or sweep your floor at least once a week or more if needed. Do not let sand, dirt, or grit build up. It will act like sandpaper, and abrade and dull the finish. ZEP Neutral pH Floor Cleaner applied with microfiber pads with a terry cloth cover is the recommended way to clean your floor. The best method of removing dirt and grit is vacuuming with a soft brush attachment on your vacuum.

LEARN MORE

Warranty

ROOM SCENE

VIEW MORE ROOM SCENES

Man installing new laminated wooden floor

The Unilin – Drop-n-Lock technology can be installed by vertically pushing one plank into the adjacent plank, without the need of a plastic insert. After installation, this profile ensures complete horizontal and vertical locking simultaneously.

LEARN ABOUT INSTALLATION

About Us Need Help? 877-238-3225

820 RE-LAM Oak

(Attached IXPE)

PRODUCT DETAILS

ROOM SCENE

1500 WG-DRY Oak

1501 WG-DRY Oak

1365 RE-WPC Oak (Attached Cork)

1360 RE-WPC Oak (Attached Cork)

821 RE-LAM Oak (Attached IXPE)

Reviews

CALL US

EMAIL US

BUSINESS HOURS

PRODUCTS

COMPANY

CONNECT WITH US!

820 RE-LAM Oak

(Attached IXPE)

PRODUCT DETAILS

ROOM SCENE

RELATED PRODUCTS

1500 WG-DRY Oak

1501 WG-DRY Oak

1365 RE-WPC Oak (Attached Cork)

1360 RE-WPC Oak (Attached Cork)

821 RE-LAM Oak (Attached IXPE)

Reviews

PRODUCTS

COMPANY

CONNECT WITH US!