Black Label Collection
[Chased Effect | Solid | 3/4”]
LIMITED WARRANTY
Finish: 25 year
Structural: Lifetime
SERIES INFORMATION:
#760 CE-S-#765 CE-S
Species/Janka| Red Oak (1280) |
|
Thickness| 3/4” |
|
Width| 3 1/4” |
|
Length| 1’-7’ |
|
Wear Layer| 1/4” |
|
SF/BOX| 20.00 |
|
BX/PLT| 52 |
|
SF/PLT| 1040 |
|
BX/WGT| 58 |
|
SF/WGT| 2.9 lbs. |
|
Waste %| 6-8% |
|
#770 CE-S-#773 CE-S
Species/Janka| Silver Maple (960) |
|
Thickness| 3/4” |
|
Width| 3 1/4” |
|
Length| 1’-7’ |
|
Wear Layer| 1/4” |
|
SF/BOX| 20.00 |
|
BX/PLT| 52 |
|
SF/PLT| 1040 |
|
BX/WGT| 53 |
|
SF/WGT| 2.65 lbs |
|
Waste %| 6-8% |
|
#780 SM-S
Species/Janka| Hard Maple (1400) |
|
Thickness| 3/4” |
|
Width| 3 1/4” |
|
Length| 1’-7’ |
|
Wear Layer| 1/4” |
|
SF/BOX| 20.00 |
|
BX/PLT| 52 |
|
SF/PLT| 1040 |
|
BX/WGT| 60 |
|
SF/WGT| 3 lbs |
|
Waste %| 4-6% |
|
#790 SM-S
Species/Janka| Red Oak (1280) |
|
Thickness| 3/4” |
|
Width| 3 1/4” |
|
Length| 1’-7’ |
|
Wear Layer| 1/4” |
|
SF/BOX| 20.00 |
|
BX/PLT| 52 |
|
SF/PLT| 1040 |
|
BX/WGT| 58 |
|
SF/WGT| 2.9 lbs |
|
Waste %| 4-6% |
|
INSTALLATION:
ADDITIONAL INFORMATION:
Core Construction| Solid Wood |
|
Core Type| Tongue and Groove |
|
Joint System| Tongue and Groove |
|
Texture| Chased Effect |
|
Edge Profile| Micro Bevel |
|
Finish Type| Model Plus polyurethane infused with alluminum oxide |
|
Gloss Levels| 4%-5% |
|
Maintenance| Bona Hardwood Formula |
|
Repair Finish| Can be screened and recoated with Bona HD Traffic (or similar) |
|
Expansion Requirements| Requires 1/2” expansion gap |
|
| Fastener Requirements 15-16 gauge L/T cleats or 7/16” to 1/2” crown staples (minumum 1 3/4” Length). Fastener spacing 1 1/2” from the board ends and every 6” - 8” along the tongue |
|
Uses| Residential |
Light Duty Commercial |
COMPLIANCE:
COMMON QUESTIONS:
SUBSTRATE REQUIREMENTS
tructurally sound, well bounded, flat to within 3/16” in 10’ radius, or 1/8” in 6’ radius. Vertical deflection cannot exceed 1/4” in 10’ radius, or more than 1/16” between the floor joist.
APPROVED SUBSTRATES
Underlayment APA grade CDX plywood/OSB. See NWFA guidelines for 3000 PSI concrete or 2500 PSI gypcrete.
WOOD SUBFLOOR (EMC) MOISTURE CONTENT REQUIREMENTS
Solid wood MC (moisture content) must test within 2% of the wood subfloor. Neither can exceed 12%.
CONCRETE AND GYPCRETE MOISTURE EMISSIONS, RH, AND PH REQUIREMENTS
Random width and/or narrower than 4 1/4” ONLY. Check with NWFA for an approved adhesive and/or moisture mitigation system for concrete/gypcrete, RH, pH, and installation requirements. (Bond and moisture mitigation warranties comes soley from glue and/or vapor barrier manufacturer.)
JOBSITE CONDITION RANGES
Prior, during, and after installation, the jobsite RH must be maintained between 35-55%, and the room temperature between 60-80°F.
ACCLIMATION TIMEFRAME
Minimum 72 hours to reach room temperature between 60-80 °F. The subfloor and the wood flooring MC (moisture content) must test within 2% of each other and does exceed 12%. If the MC falls outside this range, a longer acclimation period is required to reach equilibrium.
CAN WE INSTALL A CUSHION UNDERNEATH THE FLOOR?
Cushion is not compatible.
RUG COMPATIBILITY
Must be breathable, non abrasive, natural fiber rugs. Please see RugPadUSA.com. For example; Eco Plush 3/8”, Contour Lock, RugPro, or Superior Lock 1/4”.
