Virginia Collection
[Hand Scraped | Solid | 3/4”]
LIMITED WARRANTY
Finish: 25 year
Structural: Lifetime
SERIES INFORMATION:
#352 HS-S, #355 HS-S
Species/Janka| Hickory (1780) |
|
Thickness| 3/4” |
|
Width| 5” |
|
Length| 1’-4’ |
*Quantity per length varies* |
Wear Layer| 3/16” |
|
SF/BOX| 22.60 |
|
BX/PLT| 48 |
|
SF/PLT| 1085 |
|
BX/WGT| 72 |
|
SF/WGT| 3.19 lbs. |
|
Waste %| 5-7% |
|
#459 HS-S-#464 HS-S
Species/Janka| Hickory (1780) |
|
Thickness| 3/4” |
|
Width| RW |
|
Length| 1’-4’ |
*Quantity per length varies* |
Wear Layer| 3/16” |
|
SF/BOX| 22.42 |
|
BX/PLT| 48 |
|
SF/PLT| 1076 |
|
BX/WGT| 70 |
|
SF/WGT| 3.12 lbs. |
|
Waste %| 5-7% |
|
#465 HS-S-#468 HS-S
Species/Janka| W. Oak (1280) |
|
Thickness| 3/4” |
|
Width| RW |
|
Length| 1’-4’ |
*Quantity per length varies* |
Wear Layer| 3/16” |
|
SF/BOX| 24.59 |
|
BX/PLT| 48 |
|
SF/PLT| 1180 |
|
BX/WGT| 67 |
|
SF/WGT| 2.72 lbs. |
|
Waste %| 5-7% |
|
INSTALLATION:
ADDITIONAL INFORMATION:
Core Construction| Solid Wood |
|
Joint System| Tongue and Groove |
|
Texture| Hand Scraped (Hand Crafted) |
|
Edge Profile| Hand Sculpted, Chattered, |
Pillowed Edge |
Texture| Smooth |
|
Finish Type| 9 Finish Coats - UV cured urethane infused with aluminum oxide |
|
Gloss Levels| 9%-12% |
|
Maintenance| Bona Hardwood Formula |
|
Repair Finish| Can be screened and recoated with Bona HD Traffic (or similar) |
|
Expansion Requirements| Requires minimum of 1/2” expansion gap around all fixed objects and walls |
|
| Fastener Requirements 15-16 gauge, L/T cleats, or 7/16” to 1/2” crown staples, minumum 1 3/4” Length. Fastener spacing 1 1/2” from the board ends and every 6” - 8” along the tongue |
|
Uses| Residential Light Duty |
Commercial |
COMPLIANCE:
COMMON QUESTIONS:
SUBSTRATE REQUIREMENTS
Structurally sound, well bounded, flat to within 3/16” in 10’ radius, or 1/8” in 6’ radius. Vertical deflection cannot exceed 1/4” in 10’ radius, or more than 1/16” between the floor joist.
APPROVED SUBSTRATES
Underlayment APA grade CDX plywood/OSB. See NWFA guidelines for 3000 PSI concrete or 2500 PSI gypcrete.
WOOD SUBFLOOR (EMC) MOISTURE CONTENT REQUIREMENTS
Solid wood MC (moisture content) must test within 2% of the wood sub-floor. Neither can exceed 12%.
CONCRETE AND GYPCRETE MOISTURE EMISSIONS, RH, AND PH REQUIREMENTS
Random width and/or narrower than 4 1/4” ONLY. Check with NWFA for an approved adhesive and/or moisture mitigation system for concrete/gypcrete, RH, pH, and installation requirements. (Bond and moisture mitigation warranties comes soley from glue and/or vapor barrier manufacturer.)
JOBSITE CONDITION RANGES
Prior, during, and after installation, the jobsite RH must be maintained between 35-55%, and the room temperature between 60-80°F.
ACCLIMATION TIMEFRAME
Minimum 72 hours to reach room temperature between 60-80 °F. The subfloor and the wood flooring MC (moisture content) must test within 2% of each other and does exceed 12%. If the MC falls outside this range, a longer acclimation period is required to reach equilibrium.
CAN WE INSTALL A CUSHION UNDERNEATH THE FLOOR?
Cushion is not compatible.
RUG COMPATIBILITY
Must be breathable, non abrasive, natural fiber rugs. Please see RugPadUSA.com. For example; Eco Plush 3/8”, Contour Lock, RugPro, or Superior Lock 1/4”.
