Estate Collection

[Registered Embossed | Laminate | 13.5MM]

LIMITED WARRANTY

Finish: Limited Lifetime
Structural: 10 year Commercial

SERIES INFORMATION:

#819 RE-TL-#824 RE-TL

SpeciesOak
Thickness13.5MM
Width6 1/2”
Length2’-6’
Wear LayerAC4
SF/BOX26.08
BX/PLT42
SF/PLT1095
BX/WGT63
SF/WGT2.42 lbs
Waste %4-6%

#825 RE-TL-#829 RE-TL

SpeciesOak
Thickness13.5MM
Width6 1/2”
Length48”
Wear LayerAC4
SF/BOX14.86
BX/PLT78
SF/PLT1159
BX/WGT35
SF/WGT2.38 lbs
Waste %4-6%

INSTALLATION:

  • Float
  • Click
  • Below Grade
  • Radiant Heat
  • Nail
  • Nail/Glue Assist
  • Glue Only

ADDITIONAL INFORMATION:

Core ConstructionTuffcore HDF - High Density Fiberboard
Core TypeBlack Core 950 Psi+
Joint SystemUnilin - Drop-n-Lock
TextureRegistered Embossed (EIR)
Edge Profile1.2 mm Painted Bevel
Finish TypeAC4 Melemaine wear layer infused with alluminum oxide
Gloss Levels5 - 7%
MaintenanceZEP Hardwood and Laminate Floor Cleaner
Repair FinishN/A
Expansion Requirements5/16” expansion gap for the first 20 Lineal feet (length or width). Add additional 1/16” for every 5’ of install (length or width) upto 5/8”. T-molds are required for rooms exceeding 50 lineal feet in length and width and 40 lineal feet for installations over in floor radiant heat.
UsesResidential - Commercial

COMPLIANCE:

This series has been tested and contains the following certifications:

COMMON QUESTIONS:

SUBSTRATE REQUIREMENTS
Structurally sound, well bounded, flat to within 3/16” in 10’ radius or 1/8” in 6’ radius, vertical deflection cannot exceed 1/4” in 10’ Radius, or more than 1/16” between the floor joist.

APPROVED SUBSTRATES
Underlayment APA grade CDX plywood/OSB, 3000 PSI concrete or 2500 PSI gypcrete. Underlayment grade MDF. See installation guide for additional approved substrates. 

WOOD SUBFLOOR (EMC) MOISTURE CONTENT REQUIREMENTS
Should not exceed 12% MC (moisture content).

CONCRETE AND GYPCRETE MOISTURE EMISSIONS, RH, AND PH REQUIREMENTS
Properly install a minimum of 6mil plastic over the entire sub-strate. Overlap all seams 12” and tape all seams with mois-ture proof tape.

JOBSITE CONDITION RANGES
RH between 30-60% and room temperature between 60 to 80°F. Post installation temperature range must be within 60 to 142°F.

ACCLIMATION TIMEFRAME
No acclimation is required if the product was stored and/or transported in 60 to 80°F for at least 24 hours prior to installation. Otherwise, it must acclimate for a minimum of 24 hours. Please see installation guide for radiant heat application.

CAN WE INSTALL A CUSHION UNDERNEATH THE FLOOR?
This product has an attached 1.5mm thick high density EVA cushion. An additional cushion is not compatible.

RUG COMPATIBILITY
Must be breathable, non abrasive, natural fiber rugs. Please see RugPadUSA.com. For example; Anchor Grip, Nature’s Grip, RugPro, or Super Lock Natural.

ESTATE COLLECTION PREMIUM LAMINATE FLOORING: